OMAC

Lobe pump BB/BA Series

BB/AA is redesigned from the B Series to maintain performance, solidity and reliability. The BB/BA Series stands out with a design according to 3A Sanitary Standard.
  • Double conical bearings, a super strong gearbox, longer service life
  • Smallest shaft overhang on the market, maximum possible pump strength
  • Extra thick shafts, extra strength, longer service life
  • Contact-free lobes for maximum power, service life and product safety
  • Dual Wing rotor in anti-seizure, smaller tolerances, higher efficiency
Product Number:OMAC_BB-BA

OMAC S.r.l. is an Italian company specialising in the production of volumetric lobe pumps in AISI 316 stainless steel and special alloys (Hastelloy, Monel, Titanium).

With approximately 60 employees, OMAC is located in Europe’s food center, the Bologna area. OMAC has been producing pumps for more than 70 years and has over time constantly developed pump technology further.
Max pressure
20 bar
Max capacity
315 m³/h
Surface roughness
Ra < 0.8 to 2.0 µm
Dimensions
DN25 to DN200

Certificates

This pump can be delivered with a documentation package that i.a. contains the following certificates. Feel free to contact us if you have any questions.

EN10204-3.1
FDA
3A
10/2011
1935/2004
ATEX

Variants

Do you have any questions or do you need help finding the right component?

The lobe pump from OMAC is available in several different sizes. Feel free to contact us for help with choosing the right pump.
PEA_1000x1000
Philip Ellegaard Andersen
Area Sales Manager Food & Beverage
JQT_Jørgen_400x400px
Jørgen Q. Tran
Product Manager
MB_633x633
Morten Boje
Internal Technical Sales

Popular products

Contact

Contact a specialist for more information

Contact us if you need any help, advice or want to hear more about our lobe pump from OMAC.

Jens Christian Jeppe